Universal bodies for 1/10 scale 4x4s

[earlspromaxracing]

Do they have universal bodies that fit 1/10 scale 4x4s that can be customized an painted if so were is the best online site for them I'm guessing you would half to drill your own holes for the mounting pins right?

 

[Bwompuss]

Proline Racing Once you get an idea what you are looking for there are other sites besides this one.

Yes drill your own holes. Reamer for Making holes.

 

[CertifiedMike]

Measure the distance from axle nut to axle nut. Front to back and left to right.
That is the basic info you need to find a body to fit.
The wheel base ( length ) is prob the most important. There are some bodies that have no defined rear wheel opening but it still needs to be sort of close or it can look goofy.
In onroad cars, they do a lot by width. 190 or 200mm bodies.
Teambluegroove.com
Check this site out!
Good info, lots of bodies, nice ppl!

 

[earlspromaxracing]

Measure the distance from axle nut to axle nut. Front to back and left to right.
That is the basic info you need to find a body to fit.
The wheel base ( length ) is prob the most important. There are some bodies that have no defined rear wheel opening but it still needs to be sort of close or it can look goofy.
In onroad cars, they do a lot by width. 190 or 200mm bodies.
Teambluegroove.com
Check this site out!
Good info, lots of bodies, nice ppl!

Thanks.. good info