StoopidOme
RCTalk Basher
- Messages
- 58
- Reaction score
- 156
- Location
- St. Louis
- RC Driving Style
- Bashing
- Crawling
- Scale Builder
- Boating
I bought the proline K-10 body for one of my crawlers and the vinyl widow mask sheet came uncut. Well, it's cut but not all the way through the vinyl. It's like their cut depth was set wrong. I tried pulling the vinyl to see if it would peel but I didn't want to stretch the vinyl. So I ended up just having their cuts with an exacto. The problem was, I couldn't see their cuts very well. I ended up putting some doors on the vinyl sheet with a blue sharpie and using an alcohol pad and rubbing color into their cuts so I could see where I'm cutting. What a pain in the ass.