• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Tyre tips for MN82

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
AliExpress. They fit well.

1000008868.webp
 
Yes, I am a bit confused about adapters if I'm honest.
Are WPL and MN both 5mm hex and will the tyres fit the existing rims? Apparently they're a different size on the inside and out which seems a bit odd
 
Yes, I am a bit confused about adapters if I'm honest.
Are WPL and MN both 5mm hex and will the tyres fit the existing rims? Apparently they're a different size on the inside and out which seems a bit odd
Your stock wheels should be 5mm. The wheels Warby showed on his are a 7mm hex. So if you buy those adapters, you can use SCX24 wheels and tires and you will find a lot more options to choose from. They are likely a lot cheaper on aliexpress, but they sell them on Amazon...

QUPA AM STORE 4 PCS 5mm to 7mm Wheel Hex Hub Adapters for 1/10 WPL D12 RC Truck Car 1/24 SCX24 RC Upgrades Accessories Black https://a.co/d/av6jwtD
 
Your stock wheels should be 5mm. The wheels Warby showed on his are a 7mm hex. So if you buy those adapters, you can use SCX24 wheels and tires and you will find a lot more options to choose from. They are likely a lot cheaper on aliexpress, but they sell them on Amazon...

QUPA AM STORE 4 PCS 5mm to 7mm Wheel Hex Hub Adapters for 1/10 WPL D12 RC Truck Car 1/24 SCX24 RC Upgrades Accessories Black https://a.co/d/av6jwtD
I'm really looking to keep the cost to a minimum. Are there any wheels and tyres which are a straight swap and which aren't too big? I like the scale look of the originals and don't want a monster truck!
I think WPL also use 5mm hex right?
 
I'm really looking to keep the cost to a minimum. Are there any wheels and tyres which are a straight swap and which aren't too big? I like the scale look of the originals and don't want a monster truck!
I think WPL also use 5mm hex right?
No idea what other wheels and tires would be a direct swap. Yes, the WPL wheels will fit it, as they are 5mm. But you'll find no better selection with WPL stuff. It's just not a popular RC, and is not supported by the regular aftermarket companies like Injora, Hot Racing, etc.
 
Back
Top