Turning problem with LST2

[dhjun]

Whenever run LST2, I have a problem while turn. With high speed, LST overthrows. So, I have to reduce spped to turn anyway, and then turn LST.
How I fix this problem? Do I install optional Wing? or Adjust shock pressure?

Need your help

From Korea user

 

[jon2]

Maybe you should adjust how far the steering servo can go.Adding practice will also help your problem.Sudden turning at high speed will do that to you.

 

[syphon68]

you also may have the suspension jacked up a bit raising you center of gravity just lower it a little and see how it handles. I noticed that once I put the sway bars on it handled in the corners better too.

 

[olds97_lss]

Do you mean it flips over? Or doesn't hold the line your trying to steer for?

If it's flipping over, on high traction surfaces (concrete/grass) I don't think you will be able to avoid it. Even the muggy will flip on grass/concrete and it's CG is much lower than the LST.

You can lessen the frequency of roll overs by lowering it and/or running smaller diameter tires. With mine jacked up running t-maxx chevron tires, it will pretty much slide when I turn vs roll over, at least on grass. On concrete, it will still flip. I have mine jacked up as high as it will go though via the shock tower and suspension arm holes.

 

[dhjun]

Thank you comment!
When I experienced overflow, there was concrete and wet condition. Anyway I will try agin jack up or something.
Enjoy RC Nitro!!