Tuning my Savage X 4.6..

[marcobrien]

OK.. Trying to tune my Savage X 4.6. Running quite cool, so gradually leaning the engine in 1/16th turns to try & increase. As I start getting closer to the correct temperature, I have noticed a couple of things..

1. It sometimes stalls as I accelerate from idle.

2. It's bogging down at lower speeds & then comes alive as it gets faster.

Appreciate any help & advice..

 

[joshman1204]

Try leading the lsn a hit a see if that helps.

If you haven't yet check out the tuning guide on the ercm Site. That guide will make your nitro taking much easier

 

[bifft it]

a plastic coated paperclip is .07mm if you peel off the plastic a bit off 1 end.....good for adjusting idle screw
on my f46 motors(2), i never needed to adjust the mid screw, just left it at flush

 

[cwal1774]

Wow dude 26 threads in just 15 days. Must be some kind of record.

 

[marcobrien]

Wow dude 26 threads in just 15 days. Must be some kind of record.

Ha! I know.. Just hungry to learn (newbie). Will try & slow down a bit now. Hehe..