CupraR
RCTalk Champion
- Messages
- 184
- Reaction score
- 1
- RC Driving Style
- Bashing
Hi guys.
Kind off new to the whole nitro scene but loving it already. Got a TMaxx 3.3 earlier on this year and started a few upgrades.
Fitted a Picco .26 Max Engine
TeknoRC Rear Wing Mount with a Revo Wing.
Pro Line Badlands on 1/2" offset Desperado's.
Ofna Violator Fuel Tank
Savox 0251 Steering Servo and std Steering Servo moved to Throttle/Brake.
THS Racing Exhaust Pipe
Roll Bar
Traxxas Drive Cups with HPI Dog Bone for rear centre Drive Shaft.
Revo Vented Disc Brake.
Traxxas Big Bore Shocks.
On order
Lunsford Hinge Pins
Tekno RC Axle Carriers.
RPM A Arms all round.
RPM Skid Plates.
Now I need some upgrades for my Driveline. Already bust two of the first gears after the slipper in the transmission. Seen the Robinson Racing Transmission gears part number 8007. Do these fit my version and is it a worthwhile upgrade?
Also bust my rear diff. The plastic cup bust it's four mounting screws. Repaired that but would ideally like to upgrade these. Seen the FLM Ultimate Bulks. Are they worthwhile or is there a better or less costly method?
Id like to get my Maxx Bulletproof if possible.
Going to order the 5451R Drive Axles too I think as just bust a std rear shaft, lost an eclip I think then the pin came out.
Kind off new to the whole nitro scene but loving it already. Got a TMaxx 3.3 earlier on this year and started a few upgrades.
Fitted a Picco .26 Max Engine
TeknoRC Rear Wing Mount with a Revo Wing.
Pro Line Badlands on 1/2" offset Desperado's.
Ofna Violator Fuel Tank
Savox 0251 Steering Servo and std Steering Servo moved to Throttle/Brake.
THS Racing Exhaust Pipe
Roll Bar
Traxxas Drive Cups with HPI Dog Bone for rear centre Drive Shaft.
Revo Vented Disc Brake.
Traxxas Big Bore Shocks.
On order
Lunsford Hinge Pins
Tekno RC Axle Carriers.
RPM A Arms all round.
RPM Skid Plates.
Now I need some upgrades for my Driveline. Already bust two of the first gears after the slipper in the transmission. Seen the Robinson Racing Transmission gears part number 8007. Do these fit my version and is it a worthwhile upgrade?
Also bust my rear diff. The plastic cup bust it's four mounting screws. Repaired that but would ideally like to upgrade these. Seen the FLM Ultimate Bulks. Are they worthwhile or is there a better or less costly method?
Id like to get my Maxx Bulletproof if possible.
Going to order the 5451R Drive Axles too I think as just bust a std rear shaft, lost an eclip I think then the pin came out.