Thunder Tiger Suspension Setup

[SlingItX]

NA-

Would you be willing to 'give-up' your suspension setup on your Thunder Tiger EB-4 S2 Pro? I've seen the track you run (Boggy Creek - assuming it's your primary) and the one I'll be on is similar. So, which springs, holes, shock fluids, etc.?

I have to rebuild my front shocks (I'm using the 3 hole piston) due to lack of dampening so I figured I'd ask before I tear into it.

Thank you in advance.

-SlingItX

 

[Nitroaddict]

front:

center hole on lower a arm.
outermost hole on shock tower
stock 'yellow' springs
single hole piston's with second 2mm hole drilled in them
10mm spacers
40wt oil

rear shocks

closest mounting hole on lower a arms
lowest, outermost hole on rear tower
stock 'yellow' springs
single hole piston, second 2mm drilled out hole
40wt oil
5mm spacer


hope that helps

 

[SlingItX]

Thank You

Much appreciated. Hopefully I can run it on the track within a month or two. We're still sporting a foot of standing snow and it's 30 deg's out.

-SlingItX