ths pipe with ez start

[bergoff]

so i bought a ths pipe for $25 off of fleaeaby and after looking the truck over it looks like i totally have to remove the ezstart and the head to swap the pipe. am i correct if so i guess that i shouldn't have soldered the wires.

 

[olds97_lss]

Got a link to the pipe?

 

[bergoff]

he said that it was a hard-anodized pipe it looks great just shipping is taking for ever.

i can't get a larger pic of it sorry

 

[bergoff]

here we go here is a better one.

 

[revo racer 007]

ths

I did not have to do anything to mount my ths pipe. This one looks like the correct one for the 3.3. You should have no trouble at all.

 

[JSY0829]

I have the same pipe and no issues with the EZ start.

 

[bergoff]

i got it figured out. in order for me to remove the old header i have to take the engine out and take off the ezstart to get one screw off. it has the 2.5r and this will give me a chance to do some spring cleaning.

 

[2revo1maxx]

Start a little rich with that pipe, it'll really boost that 2.5. I have one on my 3.3, it's like adding a turbo!

 

[evownsu]

i got it figured out. in order for me to remove the old header i have to take the engine out and take off the ezstart to get one screw off. it has the 2.5r and this will give me a chance to do some spring cleaning.

you should have been able to ge to that screw....its tough, but definitely doable.

they also sell a tool that has a curved tip on it, to make it easier to bring the spring around the head of the motor.

either way you got it done....tune it and have fun.

I just isntalled this same pipe on my 3.3