Throttle linkage bending and not allowing carb to open fully

[pug]

My Revo has an LRP .28 in it and the carb will not fully open due to the throttle linkage bending at full throttle, any ideas on how to fix this?

 

[Greywolf74]

Got pics or a short video clip of what its doing? The vid clip probably more helpful but pics are better than nothing

 

[Monkey Wrench]

May have to adjust the servo horn.

 

[pug]

Got pics or a short video clip of what its doing? The vid clip probably more helpful but pics are better than nothing

 

[Monkey Wrench]

Are the end points on the TX set to 100%?

 

[pug]

Are the end points on the TX set to 100%?

Yes, I have also centered the servo.

 

[Greywolf74]

My first thought is (since I can't see it) is the brake linkage preventing full movement of the servo?

Second thought. Is that throttle servo capable of enough rotation to move the throttle all the way open? Maybe the stock servo is capable of more rotation? Has that throttle servo ever worked properly in the rig?

 

[pug]

That throttle servo has never opened it up fully, I’ll try a different servo.