• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • Friendly & passionate RC enthusiasts
    • RC tips & troubleshooting
    • Buy, sell & trade RC gear
    • Share builds & upgrades

Thinking about a project.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Hyster

RCTalk Addict
Messages
941
Reaction score
0
Points
0
Location
NC
RC Driving Style
  1. Bashing
  2. Racing
Okay... so I have gotten into this hobby but I sure haven't got a lot of experience.
Is it possible to assemble a Rig by ordering or buy parts instead of buying the whole thing in one? I assume it is as long as you know what to buy and how to put it together. ...and yes, I mean starting from scratch. Is this freezable?
 
lots of the guys here have done this, particularly with the tmaxx and building it with all aluminum.
 
good Q i was thinking of getting a roller revo from ebay and doin a lil at a time.
 
It could be done but would probly be very exspencive, unless you are trying to make a one off build using all after market parts....
 
It could be done but would probly be very exspencive, unless you are trying to make a one off build using all after market parts....

So buying parts to put the whole thing togethor comes out more expensive than buying one out of the box? Dang, then they really rip us. :\
 
So buying parts to put the whole thing togethor comes out more expensive than buying one out of the box? Dang, then they really rip us. :

Even if you were to buy all stock parts seperately and put them together it would be far more expensive than buying it as a kit or RTR. That's just the way it is.. with anything really.

But if you want a more personalized vehicle and you enjoy the satisfaction of researching exactly what you want and building it yourself a little at a time there are a few vehicles on the market that have enormous aftermarket support. The T-Maxx, Revo and Savage are all popular choices for a build project.
 
Okay... so I have gotten into this hobby but I sure haven't got a lot of experience.
Is it possible to assemble a Rig by ordering or buy parts instead of buying the whole thing in one? I assume it is as long as you know what to buy and how to put it together. ...and yes, I mean starting from scratch. Is this freezable?


It all depends on how big your freezer is.
 
So buying parts to put the whole thing togethor comes out more expensive than buying one out of the box? Dang, then they really rip us. :

You are always going to get a better deal when you a kit or a RTR because you are buying it all at one time, it's a package deal, not a few pieces here and there..
 
Okay... so I have gotten into this hobby but I sure haven't got a lot of experience.
Is it possible to assemble a Rig by ordering or buy parts instead of buying the whole thing in one? I assume it is as long as you know what to buy and how to put it together. ...and yes, I mean starting from scratch. Is this freezable?

Yes it is....um....feasible. Go to your local hobby shop and ask for a kit as opposed to an rtr. There you go! All your parts in one box!!! besides an engine and electronics of course.

:)***individual experience may vary***:)
 
Last edited:
I think there may be some confusion in this thread Hyster. I think your question is being read two ways. Some folks are assuming what you want is a "kit". A kit is an r/c that is not assembled. All of the gut of the vehicle are there. All you have to do it put it all together. However, some folks (myself included) were thinking that you were looking to build a vehicle piece by piece from aftermarket parts. If you just want to build a vehicle then a kit is a great way to go. However, it will be more expensive than buying a RTR version because kit's generally include many parts that are of higher quality than those offered in the RTR versions. Also, most kits do not come with major components such as a radio system, motor/engine, batteries etc. That will all add up. An aftermarket vehicle would be a fun project but the most expensive. However, you have complete freedom to put whatever parts from any company on your vehicle you want. I have a TMaxx that I did this to a few years ago and it's now going through it's 3rd transition. First I built it as a extended chassis twin engine truck. Then it went to standard length with single engine. Now I'm going back to extended chassis/big block engine with a little more bling factor. This is an aspect of the hobby than many of us really enjoy. Whatever type of project you're looking for you'll get a lot of enjoyment from building it yourself.
 
Back
Top