Tamiya Tnx problem stuck in first gear

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

David fildes

RC Newbie
Messages
2
Reaction score
0
Hi guys hope you can help when I start the truck all four wheels move, I have set all screws back to factory settings which did not work, and spent hours adjusting the settings 1/8 at a time just in case. The thing is the car won't idle the wheels still go no matter what is adjusted (like quarter throttle) but what is strange it shifts into 2nd gear no problem??? Any ideas guys????​
 
From what you are explaining it sounds like your clutch shoes are worn out. Take the clutch bell (Gear) off the front of the engine and inspect the clutch and spring behind the CB.
 
image.jpg
Problem solved I'd say thanks for the help
 

Attachments

  • image.jpg
    image.jpg
    944.8 KB · Views: 236
Replace the cb bearings,use steel shielded type
 

Similar threads

blind4x4
Replies
24
Views
1K
blind4x4
blind4x4
X
Replies
15
Views
1K
Nitroman7888##
Nitroman7888##
H
Replies
2
Views
716
hamedhbb
H
D
Replies
7
Views
2K
Daltonator777
D
Back
Top