T-maxx 4908 pro-line steering kit with hitec servo

[pixelss]

Hey, I'm having issues with my Pro-line steering servo saver kit and my new hitec servo ( 5985MG ). The problem is i don't know which servo horn i need to use to connect the servo to the steering or how the serv horn links with the new steering kit. Can anybody show me a picture to give me an idea how this setup goes together?

I know i can't use the stock t-max horn with the new servos. Samething with the throttle servo ( hitec servo ), which horn should i use?

I'm new to this so please help out.

Thank you

 

[revomaxx24]

http://www.pro-lineracing.com/t-HowToTipsMAXXSteering.aspx

on the servo horns there should be a leter on it the one with the H sould work for your servo. hop this helps

 

[pixelss]

http://www.pro-lineracing.com/t-HowToTipsMAXXSteering.aspx

on the servo horns there should be a leter on it the one with the H sould work for your servo. hop this helps

Thanks alot, thats what i was lookign for. Quick question.
The servo comes with the horn i need, but the holes are too small for the screw. do i need to make the hole bigger? or use a different horn? the horn i'm using is different than the stock t-maxx 3.3. That why i didn't understand how to link the steering and the servo.

 

[revomaxx24]

try a smaller screw