T-maxx 3.3 upgrades

[just_visiting]

Well, I've had my truck since February. I've broken some of the usual things; front bulkhead, shock tower, shocks, a-arms and body (my pitbull likes to chase the truck. Since I just broke another set of a-arms and 2 shocks, I've taken it completely apart. I've ordered RPM a-arm replacements. I'm thinking about aluminum bulkheads, RPM shock towers, big bore shocks with upgraded springs, chasis brasis, jeep rubicon or pickup truck body. Any input/recomendations is/are gladly welcomed.

Bulkheads:
http://cgi.ebay.com/T-E-Maxx-3-3-2-...hash=item110150556647&_trksid=p3286.m20.l1116

Shocks/Springs:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=370190612050

 

[nitro dog]

I'm running traxxas big bores with rc raven progressive rate springs. Great combo totally new truck.

 

[just_visiting]

THX Nitro......I'm starting to see that's probably a good way for me to start.

 

[Metalhead Matt]

Your upgrades are great choices. Make sure the rpm a-arms move freely in the bulk heads. They may need a bit of sanding. I'd wait until you get your aluminum bulks to install the rpm arms. That way you can make the permanent parts fit together. No intengy aluminum!

 

[just_visiting]

Your upgrades are great choices. Make sure the rpm a-arms move freely in the bulk heads. They may need a bit of sanding. I'd wait until you get your aluminum bulks to install the rpm arms. That way you can make the permanent parts fit together. No intengy aluminum!

Thx for the info Metal. Will do

 

[rwasson]

whats wrong with inegy aluminum I've heard its bad but havent heard why

 

[hipluther01]

They are made from a low quality metal and tend to not fit right and bend very easily and virtualy has NO warrenty