t maxx 3.3 problem with forward

[stariondriver]

my t maxx 3.3. will not engage forward. shifts into reverse and drives fine.

this is how it acted when i bought it used. new clutch gears installed and voila forward is working fine (for about 100 feet)

now its the same thing again.

i've done thos a few time on my original t maxx and on my maxx 2.5 and it alway went well.

 

[stariondriver]

the problem is with these


now that i have it apart for the second time i think the assembly was in wrong

 

[abadk9420]

Just do a FOC and you will get rid of the problem all together...

 

[stariondriver]

Just do a FOC and you will get rid of the problem all together...

turned out the lhs put on of the black gears in backward so the clutch would not engage fully. the holes on one side of each black gear is deeper.

so i fixed it and it runs good . keeping the reverse on the t maxx though i like it.
problem i have now is the optidrive teeth on the main forward gear broke out so it runs weird the radio will just go dead (throttle)