Steering trim on Emaxx?

[Leadfingers]

I recently broke the top and bottom suspension arm on the left side on the emaxx, also bent a couple of shocks.Got it all put back together, set the trim, but when I turn right it will not center back up. It does fine and returns to the center, if I turn to the left. I have checked it over and don't see anything binding or any bent parts.Not sure what to check now and just wondered if any of you guys had ever run into this problem. Thanks again for the help.

 

[Racer 1966]

It's possible that you damaged the servo in the crash.

 

[Leadfingers]

Thanks Racer, guess I will try replacing the servo.

 

[Leadfingers]

Could the Steering Bellcranks and Servo Saver be the problem? The pins that go through it have one flat side and are held in place by the skid plate. I noticed it holds a tentation spring. Are there any adjustments that need to be made to it?
Thanks again for the help guys.

 

[Leadfingers]

I took the linkage off the servos and they both seem to be working fine. How does the servo saver work? Something seems to be binding, but I can't see anything.......Any suggestions ? ....Thanks