Steering problem.

[Bighomedog11]

Hey I am having a problem with my t-maxx steering. I hit a curb the other day when i was driving my tmaxx and the tire poped off the ball axle thing. So i put it back on. Now for some reason i can't steer at all. When i have everything on the servo it wont move. But when i remove the steering stuff from off the servo it moves. I am wondering could it be my battery's are too low to move the wheel? I checked for problem parts and nothing seems broken. Just can't get it to turn left or right.

 

[snowking]

First check your batteries. If that's not it you might check to see if you bent a stearing arm.

 

[Raiden101]

Also check the pillow balls, if they're to tight, it'll lock up the steering

 

[olds97_lss]

If it's not the pillow balls, you may have stripped the servo horn spline. Do you hear the servo turn when everything is attached and you turn the steering wheel? Or do you hear nothing?

 

[Bighomedog11]

I figured out my problem!
It was i had my pivot balls the Hex screw was too tight. So loosen it up a bit and that fixed it.