Sorry Again

[Mido]

LOL FOR SAVAGE. ok so I'm just testing servos and all,
but when i turn the wheels barely turn they like just change direction like icm they dont actully turn. Like is there a way to adjust ?

 

[BOUTCH]

On the receiver there should be a little button you can turn (between the steering trim and the throttle trim buttons adjustment)to have more steering travel. Its prob all the way down...hope that helps!!!

 

[Mido]

Ya just tried NOTHING! still exactly the same

 

[Rolex]

Lift it off the ground. Expecting a servo to move big tires on a heavy truck just doesn't work unless it's moving.

 

[olds97_lss]

Lift it off the ground. Expecting a servo to move big tires on a heavy truck just doesn't work unless it's moving.

Rolex is right. If your testing with stock servos, your going to need to lift the front tires off the ground to see them move. Stock RTR servos are rarely very good.

If you had a nice 200oz servo in there, it would turn the wheels whether they were on the ground or not.

 

[itsalifeworthliving]

hey mido.. check the stearing throw knob again.. make sure its turned clockwise.. make sure you also have good bateries in the reciever,those 4 double A's wont last long and need to be fresh

 

[CharliesTheMan]

Yeap I agree with the other guys, pick the wheels up off the ground and see what happens.