solid throttle servo horn

[mrvern_04]

hey there everyone, sorry if this one has already been asked....

does anyone have any pics showing a good set up (or links to buy such) for a good solid servo horn for the throttle? i am working on breaking in my sts .30, and i still have the crappy throttle horn with the spring in it, so i cannot get my carb all the way open on this motor cause its a lil bigger. i'm just kinda at a loss because i know i've looked at it before, and i dont have the correct horns, nor do i know where to locate the proper collets to attach the linkage to the horn. the ones i do have now i got with the traxxas throttle mod. thanks for all the help!!! gotta run to work!

the "salvage"....its....ALIVE!

 

[beason]

i did the ofna mod on mine

and here are the bits you will need

http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXBM06
http://www2.towerhobbies.com/cgi-bin/WTI0001P?&I=LXBL85

if you have any questions lmk!!

 

[evilgrin]

here are a few pics of my current set up the servo horn is an ofna aluminum horn I belive.
although this is setup for a midtank mod I did use this horn and the OFNA buggy sliders to make the stock savage linkage more reliable.

 

[HeartBreak]

I simply glued mine into one piece, and used the throttle rod and "post" from a T-Maxx throttle linkage kit.

 

[mrvern_04]

that'll be the horn i need to use too, right? and i only need one set of each? thanks for all the help! got any clearer pics? i'm a noob and i'll probably need all the help i can get!

 

[beason]

if your refering to my setup, yes you could use that horn, but will have to trim it down to just one arm

sorry for the pics man the point and shoot just wont do closeups...

here is a shot of my old savage, different arraingment but same basic setup

and yes one of each linked

 

[mrvern_04]

hey man, thanks! pics are perfect!