Socket driver set for MGT?

[eNforcer]

In the .pdf file for the MGT Parts list it says there are some of these sizes:
M3x10mm
M3x23mm
M3x32mm
M3x30mm
M3x10mm

And then these but it doesn't say what size in Metric or SAE these are?
M2 Nut
M3 Locknut
M3 Locknut w/Flange
M4 Locknut w/Flange
M5 Locknut

I'm looking at this set from Team FastEddy but I'm not sure if this will cover all the nuts for the MGT?

http://www.teamfasteddy.com/index.p...id=140&zenid=54c20385b620cab5a036f5e3a17b5c1d

 

[Rolex]

Drop a note to FastEddy with a link to this post. He's the man in the know.

 

[FastEddy]

For the HEX WRENCHES.
The 7 unit set will cover all the screws on all 18th, 10th, and 8th scale RCs.
It has all 4 Metric and 3 SAE sizes that are used. Its a great all around set for the price.
http://www.teamfasteddy.com/index.php?main_page=product_info&cPath=33&products_id=141

I believe that the Metric set of SOCKET Wrenches you linked to should cover the nuts.

 

[eNforcer]

Thanks for the info Eddy

 

[helotaxi]

And then these but it doesn't say what size in Metric or SAE these are?
M2 Nut
M3 Locknut
M3 Locknut w/Flange
M4 Locknut w/Flange
M5 Locknut
http://www.teamfasteddy.com/index.p...id=140&zenid=54c20385b620cab5a036f5e3a17b5c1d

M3, M4 and M5 are sizes. They are metric 3, 4 and 5 mm respectively. The size is however for the screw not the nut that fits it.

M3 nuts are 5.5mm
M4 nuts are 7mm
M5 nuts are 8mm