Smartech driveshaft

[JezHall]

Hi,

Can anyone with a Smartech winner Pro 1/10 car tell me the size of front driveshaft that I need?

Thanks in advance

 

[alfredwong2003]

Based on the manuals here https://www.manualslib.com/manual/851735/Smartech-1-10-Scale-4wd-Off-Road-Buggy.html?page=9#manual, it is 60mm.

 

[JezHall]

Based on the manuals here https://www.manualslib.com/manual/851735/Smartech-1-10-Scale-4wd-Off-Road-Buggy.html?page=9#manual, it is 60mm.

Thank you for your help.

Is that 60mm total length or between the dogbones?..............apologies if thats a stupid question.

 

[alfredwong2003]

I

Thank you for your help.

Is that 60mm total length or between the dogbones?..............apologies if thats a stupid question.

I would think that is the total length, but you can measure it with a tape for approximation.

 

[olds97_lss]

Odd, if you google "smartech 103024", you can find it on this site listed as a 66mm:
https://www.bspspares.co.uk/product...ive-shaft-66mm-speedy-tiger?variant=795263435

Would suggest 60mm is pin to pin vs end to end.

 

[alfredwong2003]

You can order both from Aliexpress.com, they are cheap enough. But 6mm difference is not big, so, it 60mm most likely work. But I thought 66mm was for the rear and 60 was for the front.