Slipper clutch for the Slash

[Hyster]

Okay, what adjustments do what for the slipper clutch? I have read the manual but nothing tells me which way minimizes slipping. Tighten does or loosen. Any tips, and what are your settings?

 

[RC Addict]

Tighten the nut on the slipper to reduce slippage and loosen to increase slippage. I run mine a quarter turn back from full tight.

 

[Dave63]

Tighten the nut on the slipper to reduce slippage and loosen to increase slippage. I run mine a quarter turn back from full tight.

Agreed. If you read the manual, it tells you how/where to run it. I run mine the same: Full tight, (clockwise) then backed off (counter clockwise) 45*, or 1/4 turn.

 

[Hyster]

thanks ya'll

 

[sweetdiesel]

I run mine a half turn from fully tight. I find that on loose surfaces it helps keep the rear in check if I get too hard on the throttle.