Slash problem

[reighard53]

i never even got mine wet, and i never took it out side. it just broke.

 

[swarmjt]

i never even got mine wet, and i never took it out side. it just broke.

your not trying hard enough

 

[beason]

i never even got mine wet, and i never took it out side. it just broke.

your doing it wrong...

the boys pede did they same thing. no warning, just stopped working. it was the motor. (same setup with the 12t titan). i replaced the motor and it works fine now. well kinda...

 

[alpinehyperlite]

your doing it wrong...

the boys pede did they same thing. no warning, just stopped working. it was the motor. (same setup with the 12t titan). i replaced the motor and it works fine now. well kinda...

cept u keep killing batteries.

 

[sweetdiesel]

Hey SweetD... what motor and ESC did you replace it with?

I replaced it with another stocker since I was trying to get it running to make the A main in spec class.

When bashing at home I run a Mamba Max ESC/Feigao 380C 5000KV motor on 2S.

 

[Karl M]

Please forgive the question if it is stupid, can you up grade the motor and ESC with a stock receiver?

 

[sweetdiesel]

Please forgive the question if it is stupid, can you up grade the motor and ESC with a stock receiver?

Absolutely, no need to swap out radio gear when upgrading the esc or motor.

 

[Karl M]

I don't mean to derail the thread, but being the idiot that I am when it comes to the electronics in the truck. I went to replace a steering servo in a mini t and was told I would have to replace my receiver if I used anything but a stock servo.

 

[sweetdiesel]

I believe the Mini-T is an exception. IIRC the Mini-T rx and esc are combined in one unit and the servo on the mini t has 4 wires (instead of 3) which I assume only works with the rx/esc unit.

 

[alpinehyperlite]

That was All of the earlier Losi Mini's because the ESC and Reciever were built into one unit.