Servo Use with Imex Jumbo Tires

[Got Nitro?]

I'm curious what servo would be best to use for these massive tires. Price is a issue but if anybody has a servo suggestion that would be great. I'm looking to buy a set of these tires but I'm not sure if a Hitec 645mg will work well enough.Suggestions? Doesn't matter if it's digital or not.As long as it works well.

 

[Buggyracer28]

You are going to need a servo with at least 150-200oz. torque. Finally my truggy is able to turn with my Airtronics 358. I know its a $110 servo, but you can get them used for about $65 in perfect condition (ill find you one). The 645mg would be extreeemely slow, but if you dont mind that, it might work.

 

[supercharged]

I used a 645 in my sav and it could turn them while at a stand still when it had fresh batteries

 

[kurt_02f150]

I used a 645 in my sav and it could turn them while at a stand still when it had fresh batteries

X2

i had a 645 on a tmaxx with some 40 series big joes. it would turn them lock to lock for a few minutes on a fresh 2100mah 5 cell hump pack but after a short while you needed to be moving.


you can never have to much steering torque. Get the one that maintains significant power throughout the voltage drop.