Servo Question

[Jeabajuice]

I just replaced the servo for my Gt2 because the old one was defected. I turned the transmitter and receiver on. When I put the receiver on, the servo went forward. I pulled the throttle and it went further. Does this mean when I fire up the car, it will go on its own?
Thanks.

 

[hamz9561]

It sounds like your servo horn needs to be centered. Remove the servo horn from the servo and turn the receiver on. The servo should then go to its neutral or centered position. Once it is there, re- attach the servo horn and you should be good.

 

[Jeabajuice]

Thanks.