Servo movement?

[yveschew]

hi, i just change the transmitter and receiver on my revo but i keep the stock servo, can anyone tell me why the servo are less movement than the stock transmitter?

 

[MrClean]

If you got a better quality transmitter, it will most likely have configurable 'end points'. In other words you have to program the radio to move the servo so far in each direction (these are called the end points). You will probably have to do the steering and throttle/brake. The owners manual for the transmitter should describe the steps to get this done.

 

[Runaway Jim]

the settings on your transmitter and receiver are more than likely different than on the stock traxxas set up. If it's a DX3 set up like on a losi 8ight there are functions that allow you to set the servo travel beyond the trim settings. Check the manual that came with your new transmitter/receiver. There will more than likely be instructions in there on how to extend or shorten the travel on your throttle/brake and steering servos... Hope that helped...