Servo Hut (and questions)

[4u2nv]

I just got a good deal on a set of 40 veliociity rims and Dirt Hawg tires, and while I'm still running my stock servo, I figured now would be a good time to look for a Metal Geared High Tourq steering servo before mine goes to poop. Anyway I ran into this site ServoHut.com and was curious if anyone here had done any buisness with them. Any pro's or con's? It looked like a smaller buisness and just thought Id check it out before I got anything from them. There prices seem pretty cheap too.

2nd, When I built my Maxx, I used the servos that someone recommended to me, which were Hitec645. I liked it alot, but was curious what to look for in a good servo? I know sometimes a person has to sacrafice speed for more tourqe and more speed for less tourqe. So I was curious which you guys think is the best? Also which would be the best in my situation. (I'm strictly a basher and this would be for my Savage 25 with the 40's on it) Any help would be appriciated.

Thanks fellas

 

[Buggyracer28]

I know sometimes a person has to sacrafice speed for more tourqe and more speed for less tourqe.

Yes... unless you want to pay more How much are you looking to spend? we could probably give a better idea on which servo to get if we have that info

 

[4u2nv]

well I want to spend as least as possible (Of course) but know that doesn't happen very often in this hobby. I just need a good servo. Nothing dramatically awesome, just something that works good and is reasonably priced but not cheap crap. Something middle of the road I guess. I'm still using my stock throttle servo and still stock reciever and controls for now.

 

[ImBroken]

I would recommend the Digital version of the Hitec 645MG. It has a bit more Torque to handle the 40's..
http://www.servocity.com/html/hs-5645mg_digital_torque.html

 

[SMaxxin]

I bought a mg servo from servo hut a few years ago,119 oz of torque. I put it on a Duratrax nitro Quake and it did just fine. The speed was a little slow but it could turn those big tires while sitting still with no problem.

 

[NCNitro]

I would also recommend the Hitec 5645 digital metal gear servo that ImBroken linked you to. Servo City is great to deal with too, I have dealt with them a few times now and have always gotten excellent service.