servo help needed!!!!!!!

[protexxi]

I just brought a ansmann transmitter.

[/IMG]

Upon installing the new receiver my rear servo would set but not respond to the controls how ever the steering works like clock work.

Anyone have a idea on what could be wrong?

tahnks jake.

 

[Zdragon71]

Swap the servos on receiver and see if the other one works then. If so then its in the receiver or radio. I'm not familiar with that rx/tx but maybe someone that is will chime in with more help

 

[protexxi]

will tryit thank you

 

[Greywolf74]

+1 Zdragon. that will at least tell you if its a bad channel on the RX/TX. You may also want to try using a 6V hump pack instead of 4AAs. (or at least test it with 4 brand new alkaline AA's so you know you're getting a full 6V to the servos.)

The TX/RX looks alot like the 2CH Flysky's from HobbyPartz.com

 

[protexxi]

I'm a right noob in this hobby what is a zdragon and its got new bats and whats tx/rx?

 

[Zdragon71]

I'm zdragon and rx/tx is short for radio and receiver.

 

[Nitro4910]

TX=Transmitter RX=Receiver