Servo doin the Cha Cha

[Chelu]

Ok guys need some help. I have an ofna MBX with a hitech HS 625MG steering servo. I bought a monster GT a few weeks ago and decided to put the Hitech in the Monster GT. I took the buggy apart took out the servo (which was working fine while in the buggy) and put into the monster gt ran it for a bit and didnt really see any difference so I changed them back now when I turn on the Buggy you hear both servos "turn on" but when I turn on the radio the steering servo does the cha cha wiggling back and forth and does not respond to the radio unlike the throttle servo whichs seems to work fine. I ensured the wires are connected correctly this stupid thing just acting nuts? any one have any suggestions besides Running it over with the car?
CLint

 

[bmoc2008]

Are you sure that the batteries are fully charged?

 

[Chelu]

yep brand new batteries installed

 

[SlingItX]

Checked Everything?

Chelu-

Have you checked the crystals (assuming you're not running a synthesized system)? Swap connectors to different channels in the receiver, same effect on the throttle, or moved to the steering? Check the Rx antenna? Fresh Tx and Rx batts?

It's tough to pinpoint glitches like this but they can be narrowed down. Go through each step and see what happens.

-SlingItX

 

[Chelu]

Well I found out what fixed it............................I bought a new one lol still dont know what went on with it one minute is was fine then all of the sudden went to crap thanks for the help anyways guys.
Clint

 

[Bug_In_The_Rug]

the 600's are know to do that when they are at their end. mine did that and i sold the whole car