savage x 4.6 throttle problem...

[cmzm]

Hi guys l have a savage x k4.6 the problem is that every time I press the brake pushes the throttle inside . (when I hit the brake it closes the carb.)
I try to reposition the servo horn, I also cut a little servo saver spring the one underneath the servo horn but I still have the same problem, any recommendations.
I don't know what to do. :\

 

[Borkhart]

when you hit the brake it closes the carb? is that what you mean? not quite grasping what you mean

 

[bifft it]

try this. take the throttle servo-saver off the servo. turn on your Transmitter, center the throttle trim button on the transmitter, hammer the throttle a couple times to get servo centered, then re-install the servo saver on the servo. now you have your fine tuning ability back.

 

[Rolex]

If you're saying it shuts off the engine when you apply the brake you need to adjust the idle screw while holding the trigger in full brake position.

 

[cmzm]

Yes that's what I mean .

 

[Rolex]

Well then, you need to adjust the idle screw while holding the trigger in full brake position.

 

[wacmartin]

Taken this advice from Rolex in a sticky he's posted and it worked for me!