Sold / Found SALE & TRADE: Rollers, Chassis, motors, Tires, RTR & ARTR

[NitroROCKS]

O.k....got too many winter projects (and WAY too many RC's)...The Old Lady's coming down on me to clean up the garage and some of it's gotta go. Selling off (preferably) will consider offroad trades for some.

1: Terra Crusher -like new- w/ BRAND-NEW O.S. 18cvr (never seen fuel). Everything in great shape. Added RX/TX and is ready to run...also has reverse but not hooked up...will include linkage for it. Has 6 1/2 wheels, TNX tuned pipe, K&N air filter. Comes with Jeep Rubicon Body. NEEDs: fuel line, fuel, and break-in. This thing is the size of an LST...much larger than savage and tmaxx.
4-SALE: $300

2: Monster Pirate w/ 2speed transmission comes almost ready to run w/ like new body and 2 speed clutch bell. Rolling chassis w/ radio gear....needs engine and good to go!
4-SALE: $170

3: O.S. .15 engine. Great Compression w/ between 1/2 and less than 1 gallon of fuel. Comes w/ flywheel, carb, air filter...Bump-Start
4-SALE: $55

4: Picco .21 engine. 2 tanks after pinch...good compression. Has back plate for bump start. Scratched head. May work w/ monster Pirate above but looks like you'd need something to extend the shaft out a little...or could move mounts forward.
4-SALE: $60

5: Aluminum T-maxx/Savage RIMS...Offset (add 2" in width)...w/ aluminum hexes
4-SALE: $80

6: Set of (4) Maxx Mashers w/ foams...like new. Removed from aluminum rims but can be remounted.
4-SALE: $30

7: Set of (4) Ofna Blazer SST Truggy Wheels (rims/tires). New...never ran only mounted....some scratches in center where hex sits.
4-SALE: $50

8: Hotbodies Lightning Aluminum Electronics deck and buggy body...like new.
4-SALE: $35

9: Ofna 9.5 pro Bare Chassis plate
4-SALE: $20

other misc: TRX 2.5 stock cooling head, Mach 26 stock cooling head, pair of 2.2 hole shot tires, trx .15 parts motor, various buggy tires (used) ......make offers.

Email for pics please...may do partial trades w/ cash.
email: [email protected]

I have a Schumacher Menace, LST, Monster Blazer, Mini Quake, and Mini T ... that I'm keeping. I'll also take trades on hopups for these RC's. Especially LST hopups!!! And a primo Big Block motor!

 

[Tarant]

Do you know if any of those engines will work on a T maxx 2.5
and also do you have any parts besides the cooling head for the TRX 2.5

 

[ZANDOR]

Do you have pics of the rims?? I mite want them...do you pp

 

[Tarant]

Oh and are those mashers standerd or 40 series thanks

 

[NitroROCKS]

Tarant: The o.s. 15 would probly work ... but it's a bump start....and I don't think you can bump start the Tmaxx....you could buy a pull for it though. The picco would need a conversion kit to fit...but that's also a bump start. As for other tmaxx parts (besides the Alum rims)...I probly have some stock parts .. if your interested.

Zandor...post your email or email me so I can shoot you some pics....these are SWEET...you'll like!

 

[Tarant]

Ok Do you have a stock 2.5 Maxx chassis and do you have a piston sleeve set for a 2.5. or any other engine parts
If you dont have any of these could I have a list of what stock parts you have Thanks.

 

[NitroROCKS]

I'll have to look....but I'm about to buy a revo w/ about 1/2 to 3/4 of a gallon thru....I'm considering pulling that motor and selling it if your interested in that as well?

 

[4u2nv]

Id like to see the rims too.. [email protected] THANKS

 

[NitroROCKS]

Pics Sent LMK

 

[ZANDOR]

Email sent

 

[NitroROCKS]

and sent to you as well.

HAPPY EASTER EVERYBODY!!!!!!!!!

 

[olds97_lss]

Are these:

7: Set of (4) Ofna Blazer SST Truggy Wheels (rims/tires). New...never ran only mounted....some scratches in center where hex sits.
4-SALE: $50

these? OFNA ST Tires OFNA Rims

And, will they fit a normal buggy or are longer arms needed?

 

[NitroROCKS]

They'll fit any buggy...I bought them for my Old school blazer built on the old lx/mbx/gt chassis....and they fit fine. They just need the standard 17mm buggy hex (ofna, kyosho, etc)

 

[NitroROCKS]

TRADE PENDING W/ Savage.30 on the TERRACRUSHER and MONSTER PIRATE

 

[olds97_lss]

They didn't rub on anything? Do you have any pics of them on a normal buggy?

Sorry for the questions, but I'd hate to completely waste $50. I'm in need of new tires and if they don't fit, I'd rather spend my $50 on tires that will fit.

 

[NitroROCKS]

Well...my monster blazer is really a buggy w/ big wheels....so I know they fit. I'll try to take some pics later on there ... but these are larger than standard buggy tire (diameter).....so if you can fit buggy tires on there...these will fit no problem. They're a little shorter than regular tmaxx wheels and thinner....but fatter than buggy tires and taller......true truggy wheels.

 

[olds97_lss]

I know they are a bit larger in width and hight than normal buggy wheels/tires. I took the specs off tower and drew up a diagram, but I can't tell how much the nut indents in the rim to see how the width affects things.

I have a HB lightning 1/8 buggy.

 

[RC10lover627]

wat would u trade for a rc10gt or a super nitro rs4 or both.. lol

 

[NitroROCKS]

They'll fit no problem...but I'll send pics later....and did u see I have this for sale as well:

8: Hotbodies Lightning Aluminum Electronics deck and buggy body...like new.
4-SALE: $35

 

[RC10lover627]

would u trade for the terra crusher???