S3305 or 2070 servo

[bubba 26]

I just got a new Futaba S3305 for my throd / break controls. But I,m thinking maybe it,s stronger then the 2070 servo. And should I switch them so the best one is being used for the steering. The S3305 does have metal gears but I do'nt know the kg torque of the 2070 ?:\ The 2070 is in a Revo

 

[bubba 26]

Is there a servo chart out there someone can point me to ?

 

[olds97_lss]

The S3305 is listed at 124 oz/in @ 6V @ .2 seconds for 60 degrees.

Tower lists out the specs for many servos, but the do not list out the specs for the 2070.

I did some digging via google and found people posting specs for the 2070. 125 @ .16 @ 6V. Not sure of the validity of that though.

 

[ThunderTiger]

Stick to the futaba S3305's. I run them for throttle/ brake AND for steering on 1/8 nitro buggy's.

The S3305 is plenty adequite for either duty, but personally, i would run the the 2070 on throttle/brake duty and the S3305 on the steering. Futaba are a reliable brand where oz.in measurements are concerned. Not sure about traxxas tho......................


Olds, i think you have toooooo much time on your hands, instead of typing, go play with something or someONE !! lol

 

[bubba 26]

Thinks for the help . I'm going to switch them so the Futaba S3305 is doing the steering .