Dez - follow Team's advice about loosening the brake a bit to soften them up a little - but also keep in mind this wonderful phrase: physical forces of race cars. The reason you are pulling that fabulous 180 is due to a setup issue. if you spin around as u state under braking, then that means the rear of the car is locking up and the front isnt. U need to increase traction in the rear during braking. This can be done by adjusting the rear shocks and making them softer, and increasing the rear droop aprox 2mm. Also, if it spins when u brake in a straight line, and doesn't stop straight, then you also have some chassis tweak going on. if it spins to the right, then loosen the back left shock more than the right one. Vice versa for the other way. hope these tips help.