• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Ridiculous

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
M

Mido

RCTalk Talkaholic
Messages
447
Reaction score
0
Points
0
Location
Ottawa
RC Driving Style
  1. Bashing
  2. Racing
Ok i got the damn plane today, the freaken prop adapter broke,then i go to pull out the antenna and it comes out in 2 peices, I'm just taking off i go to land the front wheel breaks off.
THIS IS RIDICULOUS. I'm SOOOOOO PISSSSSSSSSSSSED.................
 
It seems that you didn't take enough time to get familiar with it, considering that you never flew anything before.
Airplanes are for flying, not for bashing.
 
I didnt even fly it,, I put er on the driveway, when i got near to the crub the propeller hit the curb and I HAVE NO CLUE HOW but the long screw type thread snapped in 2. Like i dont understand howthre plastic didnt brake but the screw did.. Then it was the antenna i go to lift it out and it comes out in2 peices. i tried doing the lift off then ladn reallt quick but its soo powerful just goes up and comes down!! Thats how the front broke.....Darn this really sux.
 
that is ALMOST identical to the one i have. I got the CESSNA 206. its almost identical. Instead of doing the take off from ground should i just launch it by hand atleast get it in the air????? Lol at this point breaking it even more doesn't hurt me. i tried soldering the other end of the screw onto the prop adapter it worked until i crashed. I think i soldered it about 18-20 times now:)
 
OK this is extrememly weird. I come home and i solder the peice of the screw that fell off onto the other end of the prop adapter. I go in charge my batteries while the solder solidifies. I put on the propeller and all so everything is ready to go. After the battery is done i go i see the propeler on the ground. I look closely i noticed that the peice i soldered stayed on and the other peice snapped in 2 again. How cheap. Like not even moving just standing there it can't even hold th weight of the plastic propellor. Thats pretty sad. Wat a waist for 150 bux...
 

RC Builds

Back
Top