revo problem

[hickbran]

i can't get my revo 3.3 to go. i can make it sit there and idle all day long but as soon as i touch the trigger to make it goes it dies and just stops? what do i do? do i need to get something to fix this problem or should i bring it into the shop?:

 

[weezracen]

I think it is probably something stupid wrong with your truck. I can't really help you but I am sure that someone on here will be able to if you might have to give up some more info tho. What ever you do don't take it to your lhs( local hobby shop) because learing about and working on your rig is part of the fun in this hobby. IMO. Once you start to get handle on how it works and how to fix it you will have much more fun not to mention run time good luck and don't give up!!!!!!!!!!!

 

[London808]

i can't get my revo 3.3 to go. i can make it sit there and idle all day long but as soon as i touch the trigger to make it goes it dies and just stops? what do i do? do i need to get something to fix this problem or should i bring it into the shop?:

everything set to factory ?
if not set it all back and then set the carp to 1mm (take of the air filter to do this)

 

[revo_rob_1984]

my picco does the same thing when i start it for the first time for the day,i think its just the carb gettin loaded up with fuel, but any wayz all i do is just gradually lean onto the throttle till it starts to move and then snap it to wot and it works just fine, so thats my suggestion to you, just gradually roll into the throttle and see how that works for you

 

[hickbran]

but the problem is if i touch the trigger it dies even a liitle bit or alot the same outcome? i also put it back to factory settings but nothing happened?

 

[weezracen]

Maybe try a new plug as well?? This may sound stupid but you might of reversed the ch on your tx and you are putting on the brakes when you mean to gas it??? You will get it. When my rig acts up when I start it I give it gas right away to blow out what ever bugs it has in it at the same time trying to get her temp up a little bit. Then she is good for the day.

 

[hipluther01]

i can't get my revo 3.3 to go. i can make it sit there and idle all day long but as soon as i touch the trigger to make it goes it dies and just stops? what do i do? do i need to get something to fix this problem or should i bring it into the shop?:

I would say that your settings are too rich. Try leaning your LSN a little. I had the same problem and 1/16 of a turn did the trick. Ran like a champ

 

[revo_rob_1984]

but the problem is if i touch the trigger it dies even a liitle bit or alot the same outcome? i also put it back to factory settings but nothing happened?

hmmm. . .well like everyone has said, set it back to factory and go from there, it just sounds like a tuning issue