Revo Header Flange

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

saddlehorse

RCTalk Champion
Messages
222
Reaction score
0
Location
Here
RC Driving Style
  1. Bashing
I read somewhere that cutting flange off head pipe on the 3.3 would help.
is this true?
 
not exactly sure what flange your talking about but I would assume it is where the silicone couple connects the pipe to the header.

Changing the length of the header is a large part of how a tuned pipe works. So by shortening it you will change the performance of the engine. Just simply cutting an arbitrary amount of pipe off the header without knowing what your doing probably isnt a good idea.
 
Yes flange where rubber coupler goes.
Think it was like 3/8 in or less was said to remove.
Wanna say it was on here in the revo resources or something that I read it.
 
Well it wont hurt anything but whether it give you any gains or not I dont know. It will basically change the power band of then engine either giving it more low end power or top end power but I dont know which way it will go if you shorten it.

Personally i wouldnt mess with it unless you are trying to squeeze every last bit of speed out of your rig.
 
Supposed to add some topend
Think I will just find new headpipe . Been looking with not much luck
 
Best thing to do is get rid of that POS nitro and go brushless... That will pick up your top end.
If you're one of those that will "miss the sound"; get you a kazoo.
You might not have to blow as hard as your 3.3 surely does.
Just sayin.
 
Best thing to do is get rid of that POS nitro and go brushless... That will pick up your top end.
If you're one of those that will "miss the sound"; get you a kazoo.
You might not have to blow as hard as your 3.3 surely does.
Just sayin.[/qu
 
Last edited:
Better listen to what he says
Afterall he's a guru
 
Yeah I done some research and think I will juat go with new pipe and header.
 
You should go with a new handle.

---------- Post added at 11:31 PM ---------- Previous post was at 11:30 PM ----------

Better listen to what he says
Afterall he's a guru

Agree:first_place:
 
Handle? Didnt know we where on a cb here. What an idiot.
He is just mad cause nitro is way to complicated for him. He is guru
On being an idiot
 
Now now saddlewhores that's no way to talk to your daddy.
 
You are an idiot. Really that is best you could come up with?
I would say you are around 12 years old the way you talk.

Think you smart cause youcan turn horse into whore, must habe read that on your mom's resume.
Probably don't even know what a saddlehorse is I would guess.

Well let me explain it to you. It is a type of horse, they,are called gaited and showing them has made us more money than youwill ever see with your drop out education.
 
Could ya'll take this little lovers spat to PM?
 
Settle down saddleneckbrace! Let me remind you that you started in with me.
I must admit that it's surprising that a well educated person of your financial stature would let an uneducated, dropout like me bother you so much.
Oh well, it's kinda funny.
 
Last edited:
Or mods could do their job and block him. All he has done is come in nitro and start crap. So dang atraight I am sick of it and will stand up for it.
Sorry if it offends you. But I am sick of the idiot.
 
Saddlebags, if one would review our dialog; they may find that you are the person that should be blocked.
Funny how you totally started with me and now you're crying for a moderator.
 
He had already agreed to stop, you then egged him on. Being as the other thread is gone, the mods are doing their job....may just take a little longer though, Rolex has to wax that Savage.
 

Similar threads

R
Replies
2
Views
548
rcaddict234
R
R
Replies
3
Views
930
Greywolf74
Greywolf74
R
Replies
5
Views
2K
Defiant
Defiant
mattyice
Replies
1
Views
783
Marko36608
Marko36608
Back
Top