• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

revo ez start wont turn over

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
D

destep64

RC Newbie
Messages
2
Reaction score
0
Points
0
RC Driving Style
So I got a revo on a trade, tried to start it but it wont do anything, the glow plug light just blinks on when you hit the start button, tried 2 different wands and both do the same thing, tried 2 different plugs and it does the same thing, ground is attached good, blue wire is intact. I just dont know what else to try other than maybe a new harness
 
Sounds like the engine is gummed up or the ez start motor is burnt out. Try turning the engine over by hand first
 
Sometimes the harnesses fail too, I have had several fail on me! Best thing to do is find a Ofna rotostart backplate and a nice ignitor!
 
Engine will turn over, so I guess ill try a harness and see what that will do
 
Wand battery is good and fully charged? Personally I would ditch the ex start and get a pull starter and a glow plug igniter and be done with it.
 
I would agree if the ez start is shot upgrade to a pullstart and glow ignitor job done.
I would test the ez start first ,pull it from the truck and connect the red and black wires the the motor and try that.
 

RC Builds

Back
Top