Rebuilt Questions

[Waste Land]

Rebuilt Questions UPDATE

I just rebuilt my .15fe about 15 mins ago. This was my first rebuild and evrything went very smoothly. I put my finger over the top fo engine and i can feal the hell compression. But it seems there is a little jerk in the motor close to TDC. Is this just because the the piston/sleeve is new and it has to be broken in or did u mess something up...

 

[RandyT]

It's a new piston and sleeve, so you should get that pinch at the top. You are going to have to break it in like it was a new motor. Good luck.

 

[Waste Land]

Okay this is a .15fe and i just put it back on ym RS4. I attached the carb and the head and the exhaust bu I still have to random screw that i can't find out what they go to. Its really pissin me off. Sorry i dont have my camera to take pics of them. Anytoher places u guys know they could go. I tookt he engein off the car and then a week later i rebuilt it. I pulled the exhaust,head,carb. I can't find what the last two identical bolts go to. They have a very small and shallow phillips head. About 1/2 inch long. Anyone help me, errrrrrr....I've looked over and over that damn manual and the negine has all the screws it need but where do these go then

 

[olds97_lss]

Pull start or backplate screws maybe. That's the only place i've seen phillips on or near an engine.

 

[Waste Land]

Its okay man I've already figured it out