RD Logics Twin Exhaust for T Maxx???

[beedo]

Is this pipe worth the money as far as an upgrade or is it more eye candy?

 

[2revo1maxx]

Eye candy. It does not provide good fuel pressure which will lean out your engine.

 

[donf]

! would stay away from that pipe . What engine are you running

 

[beedo]

stock 3.3, whats a good aftermarket pipe for this motor?

 

[hardmikke6996]

-10 on that pipe it dont hold a tune and its a headache to tune.
check this guy out
https://www.rcnitrotalk.com/forum/showthread.php?t=88534

 

[donf]

what pipe are you running on your stock 3.3 what gears and what are you looking for ,bottom , mid range ,or top end

 

[ckblood05]

the traxxas resonator pipe is good. thats what I'm running on my 3.3 t maxx. but the best would be a ths exhaust system! get the header and pipe. the setup goes for about $50+ but its worth it! i plan on upgrading to the ths as soon as the funds are available.

 

[2revo1maxx]

+1 either THS racing or extreme rc mods.

 

[Extreme RC Mods]

Thanks, here's a video of a stock 3.3 with 4 gallons of racing on it and a small block pipe, I've never run the THS so I can't comment on the difference in performance.

[ame="http://www.youtube.com/watch?v=futROi2OgDY"]Extreme RC Mods Small Block Pipe Testing Stock 3.3 Revo - YouTube[/ame]

 

[2revo1maxx]

I don't have your pipe yet^, but judging by this video it will run better than the THS.

 

[donf]

Robin that one awesome performance for a stock 3.3 and beedo should look in to it good job

 

[moe7404]

i have a RDs dual pipe on a jato. to get the pressure right get a check valve on the line, with a pressure re leave small hole, about . .040-. 050 dia. on a O.S. 21 runs great. get some ear plugs.

 

[beedo]

Checked out both the Extreme RC and THS pipes, gotta say on my budget the THS is more to my liking especially with the color;
https://www.sitegidget.com/itechapp...=http://www.thsracing.com/110-carstrucks.html
Go figure CC ready and they are out of stock? There is a blue pipe on ebay wondering if it is any good :
http://www.ebay.com/itm/390225083312?ssPageName=STRK:MESINDXX:IT&_trksid=p3984.m1436.l2649
I am currently running the stock pipe for the 4908 Maxx 3.3

 

[2revo1maxx]

That blue pipe you linked is for the old chassis t-maxxes. It won't fit yours properly and will cost you low end power.

---------- Post added at 11:59 AM ---------- Previous post was at 11:56 AM ----------

I have this, but had to bend the manifold so the pipe could be angled down for a more secure mounting:https://www.sitegidget.com/itechapp...erer=http://thsracing.com/110-carstrucks.html

This is a bolt on for the 4908:https://www.sitegidget.com/itechapp...erer=http://thsracing.com/110-carstrucks.html

I know mine works well, but I haven't read any feedback on the second one.

 

[dynacopas]

If you can find one get the cvec dual pipe. It has a unique baffle in the chamber and spring that gives you the low end torque and top end power. Its much better then the RD logics.

 

[2revo1maxx]

Good luck with the cvec, but the buku works on the same principle.

 

[dynacopas]

2revo1maxx why do you say good luck with the cvec. I have one on my maxx and it works great. It has a unique sound to it for sure. I didn't even know about the cvec until I saw one advertised locally. Got it pretty cheap and it works great.

 

[2revo1maxx]

Because they are hard to find.

 

[dynacopas]

I didn't realize that they are hard to find.

 

[beedo]

Hey bro where do they sell the CVEC? Are they out of business, is e-bay the only option?