OK here's one SICK T-maxx.....I know the maxx is crap right? WRONG...not this one anyway......
Integy Chassis, receiver box, MSR4 shocks, fastlane bulkless, P2 engine about 1.5 gal..newly sealed, RPM arms, Towers, Steering Knuckles, RRP & HCR tranny gears, brake kit and Double slipper spur, racers edge Clutch Bell, MIP clutch shoes (new), GA braces, racers edge center skid, aluminum fr/r skids, stainless steel hex screws throughout, 40 series w/ road rage tires, used but still usable for a long time, rims are scratched up pretty good but not stretched (at the hub) or cracked, mip center cvds....proline steering kit....the only thing stock is the trany case, wheel hubs, wheel axles and turnbuckles (they all break anyway why but expensive stuff to break)....if the trade is sweet enough I can add 2 almost new hitec 645mg servos as well....this t-maxx will not dissapoint...the p2 will flip it on it's back going into 2nd gear on the street or dirt......pics available.....asking 500 w/ servos and Futaba FM Rx....... and yes this beast is worth every penny for a racing MT.....really looking for trades...one thing I know my poop is on point....ask anyone I've traded something for and it has been exactly if not better than i described it......so your poop better be as well...this thing is so clean you could eat off it.....I broke it down to screws and nuts to clean it and have not run it since....I'm actually still putting together, but got it 75% done so I can finish it or you can if you'd rather do that....here's what I'm looking for......X-Ray or MBX-5, rolling chassis or parts....3PK radio....P5 or other high end mills still on the fence as to what I want.....consider other trades as well....engine is set up w/ the EZ starter cause I don't race this one...I used it for running in big flat fields when I went to the park w/ kids...used but not abused and still looks as close to new as used can look (?????).....
Integy Chassis, receiver box, MSR4 shocks, fastlane bulkless, P2 engine about 1.5 gal..newly sealed, RPM arms, Towers, Steering Knuckles, RRP & HCR tranny gears, brake kit and Double slipper spur, racers edge Clutch Bell, MIP clutch shoes (new), GA braces, racers edge center skid, aluminum fr/r skids, stainless steel hex screws throughout, 40 series w/ road rage tires, used but still usable for a long time, rims are scratched up pretty good but not stretched (at the hub) or cracked, mip center cvds....proline steering kit....the only thing stock is the trany case, wheel hubs, wheel axles and turnbuckles (they all break anyway why but expensive stuff to break)....if the trade is sweet enough I can add 2 almost new hitec 645mg servos as well....this t-maxx will not dissapoint...the p2 will flip it on it's back going into 2nd gear on the street or dirt......pics available.....asking 500 w/ servos and Futaba FM Rx....... and yes this beast is worth every penny for a racing MT.....really looking for trades...one thing I know my poop is on point....ask anyone I've traded something for and it has been exactly if not better than i described it......so your poop better be as well...this thing is so clean you could eat off it.....I broke it down to screws and nuts to clean it and have not run it since....I'm actually still putting together, but got it 75% done so I can finish it or you can if you'd rather do that....here's what I'm looking for......X-Ray or MBX-5, rolling chassis or parts....3PK radio....P5 or other high end mills still on the fence as to what I want.....consider other trades as well....engine is set up w/ the EZ starter cause I don't race this one...I used it for running in big flat fields when I went to the park w/ kids...used but not abused and still looks as close to new as used can look (?????).....
Last edited:
