Push Rod Question.

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Bkyd Basher

RCTalk Addict
Messages
1,090
Reaction score
20
Location
Stamford Ny
RC Driving Style
  1. Bashing
  2. Racing
Comparing the new Aluminum pushrods to the stocked there is quite a bit of difference in length. Should i use the small red spacers from the stock ones? And on the package it says to use on the LT and the progressive 1 rockers, but on the rod its says p1 p2 lt. Am i ok with the p2s then? Thanks.I'm asking because i lost even more ground clearance.
 
i just put a set in the rear about 10min ago, i swapped over the spacers. I'm thinking I'm going to pull apart my shocks again and put the #3 pistons in as the thicker shock oil hasnt made too much of a difference when it comes to bottoming out.
 
I just only have like maybe 2 inches of ground clearance, maybe less. Which Rockers should i b useing, any ideas?
 
Back
Top