Well, its that time! While I'm just about done with my CyberSavage, I had to wait for a part to be cut, I have decided to move along with my Fioroni MP 7.5 conversion.
As it stands, my Kyosho Inferno MP 7.5 is pretty darn stock. And has proven to work very well at that. Well now is time for a semi-overhaul with the rest coming at the end of the season.
For starters:
MP-7.5 Ergal Hard and Lightened 4mm Main Chassis
MP7.5 Ergal Rear Shock Tower (6mm Lightened)
MP7.5 Ergal Front Shock Tower (6mm Lightened)
MP7.5 Steering Upper Plate (6mm Lightened)
MP-7.5 Radio Tray (3mm Lightened)
You can see the parts here:
http://www.gsracing.com/gsracing/page.asp?pg=products&catid=35&fatherid=8&rootid=1
MP7.5 Ergal Rear Chassis Brace
MP7.5 Ergal Front Chassis Brace
MP7.5 Turnbuckle Set (6 pcs.)
Ferodo Brake Disc for Kyosho (1 pc)
You can see those parts here:
http://www.gsracing.com/gsracing/page.asp?pg=products&catid=34&fatherid=8&rootid=1
By the end of the season I expect to pickup some Torsen diffs for the front and center. As well as the center bulk/brake assembly, some CVD's and possibly the option mounts for my hinge pins.
The project is on!
As it stands, my Kyosho Inferno MP 7.5 is pretty darn stock. And has proven to work very well at that. Well now is time for a semi-overhaul with the rest coming at the end of the season.
For starters:
MP-7.5 Ergal Hard and Lightened 4mm Main Chassis
MP7.5 Ergal Rear Shock Tower (6mm Lightened)
MP7.5 Ergal Front Shock Tower (6mm Lightened)
MP7.5 Steering Upper Plate (6mm Lightened)
MP-7.5 Radio Tray (3mm Lightened)
You can see the parts here:
http://www.gsracing.com/gsracing/page.asp?pg=products&catid=35&fatherid=8&rootid=1
MP7.5 Ergal Rear Chassis Brace
MP7.5 Ergal Front Chassis Brace
MP7.5 Turnbuckle Set (6 pcs.)
Ferodo Brake Disc for Kyosho (1 pc)
You can see those parts here:
http://www.gsracing.com/gsracing/page.asp?pg=products&catid=34&fatherid=8&rootid=1
By the end of the season I expect to pickup some Torsen diffs for the front and center. As well as the center bulk/brake assembly, some CVD's and possibly the option mounts for my hinge pins.
The project is on!