-
Welcome to RCTalk! 🚀
Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!
- ✓ Friendly & passionate RC enthusiasts
- ✓ RC tips & troubleshooting
- ✓ Buy, sell & trade RC gear
- ✓ Share builds & upgrades
Post pics of you Stadium Truck here!!!
- Thread starter .21Rc10GT
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
beason
Bash, Fix, Repeat..
i got a set of road looking tires on a diff set of rims, so all i gotta do is switch..
dunno what kind they are but these are them
dunno what kind they are but these are them
That all I have right now is road tires and they dont do very well on loose gravel lol. Again I apprecite the tires .21Rc10GT I can't wait to try them out 
. I used to have some of those for the rear of my Rustler Beason they did good on most surfaces, are those really soft? mine where they where almost like wrinkle wall slicks lol probally was the foams in them I dunno though
. I used to have some of those for the rear of my Rustler Beason they did good on most surfaces, are those really soft? mine where they where almost like wrinkle wall slicks lol probally was the foams in them I dunno thoughDirtRacinFool
RCTalk Qualifier
- Messages
- 129
- Reaction score
- 0
- Points
- 0
- RC Driving Style
beason said:
Those look like a worn set of Pro-Line Gladiators.
bustedgears
Hardcore RCTalk User
My Freshly Rebuilt NitroMT!!!
Here she is:
O.S. Max .18 CVRX
Aluminum Arms
Aluminum Braces
Aluminum Shock towers
Aluminum C-Hubs
OFNA Air Filter
Hitec LYNX Sport Radio
F-350 Body
Black HPI Wheels
Proline Masher 2000 Tires
Nude Shot!Don't Get Too Happy.
With Body
Here she is:
O.S. Max .18 CVRX
Aluminum Arms
Aluminum Braces
Aluminum Shock towers
Aluminum C-Hubs
OFNA Air Filter
Hitec LYNX Sport Radio
F-350 Body
Black HPI Wheels
Proline Masher 2000 Tires
Nude Shot!Don't Get Too Happy.
With Body
bustedgears
Hardcore RCTalk User
Jesse: I just got it from a trade from one of my bash buddies. He didn't take good care of it at all. When I got it, the diffs were blown, the body was trashed, the mill had crap all in it with no aro to be found, missing screws everywhere, bad glow plug, badly out of tune, and a stripped spur gear. Oh, and the thing was in two pieces. BUT, four days of working on it, and about $80 spent yeilded THAT. What you said is true though, I do clean mine thouroughly after every run.
.21: No, it's not a t-maxx body. It's an HPI Body actually made for it. HPI Part #7174
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXAPU2&P=7
.21: No, it's not a t-maxx body. It's an HPI Body actually made for it. HPI Part #7174
http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXAPU2&P=7
Well you did a nice job fixing her up, sweet truck! I like to keep my trucks as clean as possible make them look nice and if there is a problem its easier to find when you dont have to deal with chunks of mud and other junk.
bustedgears
Hardcore RCTalk User
JESSE G said:
My thoughts exactly. Every time I get a new (to me) truck used from someone else. I always do a complete tear down and inspection. I can't stand it when I crank up and something stupid is wrong with it.
bustedgears
Hardcore RCTalk User
Ever seen JB Weld in a diff? Bad idea!
Anyway, I just cranked her up and that thing hauls for it's weight. Not bad for an $85 engine.
Anyway, I just cranked her up and that thing hauls for it's weight. Not bad for an $85 engine.
No that I havent. Glad it ran good for you Here is a pic of my Electric rustler
It had a lot of upgrades but nothing special. I had a 10 turn motor in it but It fried the other day so now it has the stock stinger motor. And yes I know the tires are on backwards lol I was messing around anyway here it is. This was my first rc that wasn't bought at Radio Shack or Walmart lol
Here is a pic of my Electric rustler It had a lot of upgrades but nothing special. I had a 10 turn motor in it but It fried the other day so now it has the stock stinger motor. And yes I know the tires are on backwards lol I was messing around anyway here it is. This was my first rc that wasn't bought at Radio Shack or Walmart lol
bustedgears
Hardcore RCTalk User
I'll bet that thing was a blast with that 10 turn motor on it.
Here is my new RC10GT I just finished,got a killer deal on a new kit and am taking my time to build it.It has Lunsford Titanium turnbuckles,RPM Battery Box,
RPM Ball Ends,Pro-Line Dirt Hawgs,I am using an old OS .15 CV-R I had stored.I have a feeling I am gonna need a new radio.I am not getting the steering adjust ment or movement out of the S3003 Futaba servo I am running in the steering.As well as the adjustment outta the radio itself is not so hot(Mag. JR-6 yrs old.),Thinking ogf getting a new servo first.Anyway here are some pics....
RPM Ball Ends,Pro-Line Dirt Hawgs,I am using an old OS .15 CV-R I had stored.I have a feeling I am gonna need a new radio.I am not getting the steering adjust ment or movement out of the S3003 Futaba servo I am running in the steering.As well as the adjustment outta the radio itself is not so hot(Mag. JR-6 yrs old.),Thinking ogf getting a new servo first.Anyway here are some pics....
jato1972
RCTalk Basher
My Jato,added dirt hawgs for rear/dirt,plus ACE outlaw pipe...she screams
jato1972
RCTalk Basher
My jato with revo cooling head,and revo motor-saver filter..more air plus cooler runnin temps=power to burn..oh yeah,needed new tyres too...pro-line dirt works..
