I'm currently partway through the assembly and set up of the HobbyKing Paramotor kit - it all seems OK - I've managed to get the servos working and mixed OK etc but I'm having trouble with the ESC and specifically the output that can be used to drive the RX and other servos. When I check the pins in the connector to the RX with a multimeter they don't seem right in that I don't seem to get +5.5V where I expect (though one of the pins is at 5.5V). I'm wondering if it was miswired new or is faulty or something else - does anyone know how I can check it out. This is it...
Would be really grateful for some help - I'm using the stock HK motor and I bought an Orange TX and RX which bonds OK and works as expected. I've also got a Rhino 6200mAh 4S 50C Lipo Battery Pack W/XT90. Any help gratefully received by this newbie!
Would be really grateful for some help - I'm using the stock HK motor and I bought an Orange TX and RX which bonds OK and works as expected. I've also got a Rhino 6200mAh 4S 50C Lipo Battery Pack W/XT90. Any help gratefully received by this newbie!