• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

plz help

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
K

king_woody

RCTalk Basher
Messages
52
Reaction score
0
Points
0
RC Driving Style
  1. Bashing
i am just wondering if t-maxx 3.3 transmisson parts and other parts will fit on the t-maxx 2.5 because i have the t-maxx 2.5 but i am just wondering if i can use the parts from the t-maxx 3.3
 
The transmission isn't a drop in I don't think. Requires different center axles, brake parts, slipper/spur assembly and CB. I think similar is true with the 3.3 diffs, requires new axles/bearings, axle carriers and I think 3.3 bulkheads for the diffs to fit.

Arms, towers, shocks, pipe, header, engine mount, fuel tank and a few other things are interchangeable.
 
alright becuase i just bought XeRun 150 Amp ESC/ Kershaw Designs Revolver XL Motor 7XL with a 6s lipo and i really dont think that the transmisson will hold up in the truck and i was just seeing if the parts would fit because my buddy had the truck and it was upgraded to fit the mach 26 motor and it has all aluminum parts the only think not is the front diff case on the truck its just the transmisson i am worryed about so if u guys can help me plz do thanks for the help you already gave me
 
The old and new trannys are about equal in strength if the forward only conversion is installed. The biggest difference is the slipper. The new one is far superior. There's a kit that allows the new slipper to be installed on the old tranny.
 
were can i find the kit

and because i wanted to get metal gears for the transmisson and i dont know if they still make them for the that truck becaus i dont think plastic will hold up
 
does anybody else have anything to put in because i kinda just want the gears inside because i want metal ones
 
Robinson Racing makes metal gears. The set goes for about $100. My buddies been running the Mamba Monster/ 2200kv combo with 6s on an E Maxx for over a year with no tranny problems. A proper slipper setup will ensure a long driveline life. Even with his slipper over-tightened, the diffs broke. Not the tranny. Just some info for ya.
 
alright thanks because this truck is different from what i am used to because i have owned savages untill my buddy gave me this truck for free so i really dont know anything about it but if you guys want pics of it when i am done just ask me and i will put some up here for u guys
 
alright i am just waiting for the motor to come and then i will
 
does anybody know if the singal speed is a good thing to have or is it bad because i just put it in and i am about to drop the brushless motor in
 

RC Builds

Back
Top