Pinion gear pitch problem

Welcome to RCTalk

Come join other RC enthusiasts! You'll be able to discuss, share and private message with other members of our community.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

yachtnutz

RCTalk Basher
Supporter
Military Veteran
Messages
76
Reaction score
115
Location
Dallas Tx
RC Driving Style
  1. Crawling
  2. Scale Builder
  3. Boating
So I have my new Castle Creations sensored motor and the shaft diameter is 5mm and the stock gear is 1.87 bore . I did some calculations and the stock pinion pitch is 33.9 and has 10 teeth , the problem is I can’t seem to find a 5mm bore pinion gear with a pitch of 33.9 , I dont Think I can drill the stock gear up to a 5mm bore it’s to small . Does anyone have an idea what I can do beside changing All the gears in the 2 speed tranny HELP please !
 

Attachments

  • 1E6B2F1F-4B10-420B-B662-3C2E69A1231A.jpeg
    1E6B2F1F-4B10-420B-B662-3C2E69A1231A.jpeg
    443.7 KB · Views: 55
  • F305C473-3884-456D-A427-F113FDB5B40C.jpeg
    F305C473-3884-456D-A427-F113FDB5B40C.jpeg
    328.9 KB · Views: 40
your measurements don't make sense to me...1/8" shaft 312 mm s on 5mm does. 32 pitch 48 pitch some odd ball Chinese ones. what rc is this from?
 
your measurements don't make sense to me...1/8" shaft 312 mm s on 5mm does. 32 pitch 48 pitch some odd ball Chinese ones. what rc is this from?
I know I’ve never heard of a pitch of 33.9 but that’s what keeps coming up every time on the stock pinion gear ,sorry I measured it wrong it’s a bore of 3.12mm on the stock pinion gear, it’s a crossrc kit !
 
Last edited:
Back
Top