• Welcome to RCTalk! 🚀

    Join the #1 RC community where hobbyists connect, share, and get expert advice on RC cars, trucks, boats, drones, and more!

    • ✓ Friendly & passionate RC enthusiasts
    • ✓ RC tips & troubleshooting
    • ✓ Buy, sell & trade RC gear
    • ✓ Share builds & upgrades

Picco .26 Engine mount

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
V

velocity

RCTalk Rookie
Messages
19
Reaction score
0
Points
0
Location
Queen Creek,AZ
RC Driving Style
  1. Bashing
  2. Racing
Is there a good mount for the picco .26 cause my freind has gone through 5 ofna mounts for the picco already in about 2 mounths.Ofna picco mount are pourly made.Any help would be appriciated.
 
This one?

picture.php
 
Be careful with the New Era Mount. Some of them are offset so the engine mounts about 1/8 inch too far forward. This isn't an issue if you are running a 40T spur but if you are running a 36 or 34 the CB rubs on the slipper.
 
I stripped out the holes on my ofna too. I ended up having them retapped for english threads and have had no issues since.

If you re tap them for the english equivelant you will have to open the holes on the motor too.
 
m00nst0ne69 said:
I stripped out the holes on my ofna too. I ended up having them retapped for english threads and have had no issues since.

If you re tap them for the english equivelant you will have to open the holes on the motor too.
Click to expand...

Ya thats what i told my freind
 
I got the New Era mount but had issues with the motor being too far forward. I put the same set up on the Ofna and the motor is positioned correctly. I like the New Era mount and think it was a manufacturing defect but I can't spend another $40 to get another and have it be wrong.
 
Help!!!

I recieved my picco .26 today and i don't have the mount for it. . .i was wondering if there was a way that i could use the stock mount and mount it to the picco, if not no big deal but i really really really wanna run my truck now with the new engine but i can't with out knowing if i can use the stock mount or if i hafta wait for the mount. . .please help
 
I have the OFNA mount on my Maxx and I agree that it is poor metal. I just switched to longer bolts and so far no problems.
 
revo_rob_1984 said:
I recieved my picco .26 today and i don't have the mount for it. . .i was wondering if there was a way that i could use the stock mount and mount it to the picco, if not no big deal but i really really really wanna run my truck now with the new engine but i can't with out knowing if i can use the stock mount or if i hafta wait for the mount. . .please help
Click to expand...

No you will need a new mount.
 

RC Builds

Back
Top