2revo1maxx
Hardcore RCTalk User
Hey guys I've got about 3/4 of a gallon through this max 21 and it has good top end but no wheelie power in my maxx. I've tried everything, it's sealed, Idles well, tried different fuel, fuel line/plug configs, clutches and pipes, it won't outrun a 3.3. In fact I have a 3.3 that'll wheelie just fine. There's no dirt or crud or leaky lines......nothing. All I can figure is that the carb is screwed up. It says the lsn should be flush, but it won't do anything but lean stutter and try to go when I start to turn it in. It's about 2.5 turns out from flush and the idle gap is about 1mm. I've had the lsn out to replace the o-rings and it did finally start to idle right, but something's goofy.