OS Engine Parts

[Bkyd Basher]

Hey guys I'm lookin for a few specific parts for an OS Max30VG(p)-x is what i found on there site. The only thing i can find is tower hobbies and the dont sell the things i need,and i dont think OS sells parts correct? I dont imagine the parts are just unavailable,at least i hope not. Any Ideas. I'm lookin for the rear adaptor for the pull start to mount to, a dust cover for the carb(the rubber boot on the slide shaft). Also air filter assembly but i can find something to work for that. Any help would be great. Sorry i did find parts but still can't find the rear adaptor for the pull start and dont want to have to buy roto start and setup,so still searching.

 

[moe7404]

i find getting parts is best done from a good local hobby shop. the only trouble is finding a GOOD hobby shop.

 

[Bkyd Basher]

Ya but you see my LHS is over an hour away and they r half ass, so if i can find something on the internet its much easier

 

[Tremonic]

http://shop.ebay.com/items/os 30vg?...geo_id=1&keyword=os+30vg&adgroup_id=922222295

 

[olds97_lss]

Filter (not factory, but better): http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXVPA5&P=ML
Dust boot: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXLJW0&P=7
Pull start back plate: http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXPUF7&P=7

Towers parts list for that engine: http://www3.towerhobbies.com/cgi-bin/wti0005p?&I=OSMG2078&P=Z

The -x is just how OS denotes that it's the pull-start version.

 

[jbyrd141]

was that originally an os .30 vg x? I have an os .30vg, and want to convert to pullstart. Did you have to change the crankshaft? looks like the x crankshaft is a dif part number.