CONUS shipping only plz. Will consider best offers or trades but mostly looking for cash. I'm partially interested in Traxxas 1/16 minis (even rollers). Also Interested in Losi 1/24 SCTs., Interested in Revos VXLs (even Rollers).
Will Discount for shipping for multiple items.
Still have these and the Nitro Rustler Roller with Anacondas for sale. There is a small chip of plastic missing from one of teh anacondas but its pretty small and does not hurt the structural integrity of the wheel at all. I took a close of picture of the wheel.....its hard to even notice theres a chip there without looking hard. This kit is clean...did a total tear down and cleaning of it prior to posting it. The Anacondas are pretty new....I've run on them maybe 6 packs. Shocks are brand new all the way around it. fuel tubing it new. The battery pack is a 4AA holder thats been hard wired to the switch. You could either resolder the wires from the switch or just cut the wires on the AA pack and crimp whatever hump pack connector you like to use on it. Lets see the front arms are also brand new. checked all the bearings all the way around this kit. It does have a metal gear high toque servo although I'm afraid it is a cheap Chinese brand, it does work surprisingly well though. The body that comes with it is just a basher body which is beat all to hell.....its great for bashing but it isnt too pretty heh. $165 for the Roller and spare parts. $205 and Ill throw in the engine with the carb. This is about as clean as a roller/kit comes Dont make me put it on evilbay!
Heres a video of the electronics being tested out on this.
[ame="http://www.youtube.com/watch?v=cCSoJjZdtGw"]Nitro Rusty Electronics test.avi - YouTube[/ame]
All of these extra's come with it...
I have a few extras to sell that dont come with it also.
Dyable Jato/Nitro Rustler 2.2 FRONT Rims. These rims are made to be Dyed any colro you want. They are the fronts for Jatos and Nitro Rustys as they have no heve only spaces for bearings. The rears you can buy at TowerHobby or Amain for about 5 bucks + shipping. Selling these NIB $6 shipped.
Caster blocks, Steering Knuckles, Front spindles, and rear axel carriers for Nitro Rusty. $8 Shipped
Blue Aluminum axel carriers Rustler/Stampede/Slash $10 Shipped.
Blue Aluminum Rear Shock Tower Nitro Rustler/Stampede (Never used, still new w/ Shock mounts) $14 Shipped
Blue Aluminum Front Shock tower Nitro Rustler w/ Shock mounts $14 shipped.
Rustler/Stampede/Sport/ Blue Aluminum Front A-Arms. The silver spots are not wear. I grinded them down slightly in that area to make my RPMs so they didnt rub right there. very little material was actually removed. $12 bucks shipped.
Theres other spare parts but you'll have to see my other thread for those. extra pipe, engine mount, transmission, things like that.
https://www.rcnitrotalk.com/forum/showthread.php?t=95313
This engine is also a TRX 2.5. This one has had about 4-5 gallons through it (best guess). Still has good compression. Bear in mind when you watch the video that the compression popping noises you hear are without a glow plug in it. If it had a glow plug in it it would pop louder. This one has been sitting in a bag unused for the last year. Its always had Aro in it and once every few months gets a few new drops of ARO. Asking $45 shipped for this one.
[ame="http://www.youtube.com/watch?v=TLnxjTYXrXk"]SDC12531.AVI - YouTube[/ame]
This engine has had about 5 gallons through it and has been in storage in a bag for about the last 2 years. Again always used ARO on it even occassionally during storage. Still has good compression. The video for this one it has a glow plug in it and you can hear the actual compression. The only down side is that the engine needs a carb body. I'm including all the carb parts all you need is a $10-$12 carb body to make this work. This also comes with the easy starter on it. Asking 35 Shipped for this one.
[ame="http://www.youtube.com/watch?v=ll24VmiYYSY"]SDC12532.AVI - YouTube[/ame]
Will Discount for shipping for multiple items.
Still have these and the Nitro Rustler Roller with Anacondas for sale. There is a small chip of plastic missing from one of teh anacondas but its pretty small and does not hurt the structural integrity of the wheel at all. I took a close of picture of the wheel.....its hard to even notice theres a chip there without looking hard. This kit is clean...did a total tear down and cleaning of it prior to posting it. The Anacondas are pretty new....I've run on them maybe 6 packs. Shocks are brand new all the way around it. fuel tubing it new. The battery pack is a 4AA holder thats been hard wired to the switch. You could either resolder the wires from the switch or just cut the wires on the AA pack and crimp whatever hump pack connector you like to use on it. Lets see the front arms are also brand new. checked all the bearings all the way around this kit. It does have a metal gear high toque servo although I'm afraid it is a cheap Chinese brand, it does work surprisingly well though. The body that comes with it is just a basher body which is beat all to hell.....its great for bashing but it isnt too pretty heh. $165 for the Roller and spare parts. $205 and Ill throw in the engine with the carb. This is about as clean as a roller/kit comes Dont make me put it on evilbay!
Heres a video of the electronics being tested out on this.
[ame="http://www.youtube.com/watch?v=cCSoJjZdtGw"]Nitro Rusty Electronics test.avi - YouTube[/ame]
All of these extra's come with it...
I have a few extras to sell that dont come with it also.
Dyable Jato/Nitro Rustler 2.2 FRONT Rims. These rims are made to be Dyed any colro you want. They are the fronts for Jatos and Nitro Rustys as they have no heve only spaces for bearings. The rears you can buy at TowerHobby or Amain for about 5 bucks + shipping. Selling these NIB $6 shipped.
Caster blocks, Steering Knuckles, Front spindles, and rear axel carriers for Nitro Rusty. $8 Shipped
Blue Aluminum axel carriers Rustler/Stampede/Slash $10 Shipped.
Blue Aluminum Rear Shock Tower Nitro Rustler/Stampede (Never used, still new w/ Shock mounts) $14 Shipped
Blue Aluminum Front Shock tower Nitro Rustler w/ Shock mounts $14 shipped.
Rustler/Stampede/Sport/ Blue Aluminum Front A-Arms. The silver spots are not wear. I grinded them down slightly in that area to make my RPMs so they didnt rub right there. very little material was actually removed. $12 bucks shipped.
Theres other spare parts but you'll have to see my other thread for those. extra pipe, engine mount, transmission, things like that.
https://www.rcnitrotalk.com/forum/showthread.php?t=95313
This engine is also a TRX 2.5. This one has had about 4-5 gallons through it (best guess). Still has good compression. Bear in mind when you watch the video that the compression popping noises you hear are without a glow plug in it. If it had a glow plug in it it would pop louder. This one has been sitting in a bag unused for the last year. Its always had Aro in it and once every few months gets a few new drops of ARO. Asking $45 shipped for this one.
[ame="http://www.youtube.com/watch?v=TLnxjTYXrXk"]SDC12531.AVI - YouTube[/ame]
This engine has had about 5 gallons through it and has been in storage in a bag for about the last 2 years. Again always used ARO on it even occassionally during storage. Still has good compression. The video for this one it has a glow plug in it and you can hear the actual compression. The only down side is that the engine needs a carb body. I'm including all the carb parts all you need is a $10-$12 carb body to make this work. This also comes with the easy starter on it. Asking 35 Shipped for this one.
[ame="http://www.youtube.com/watch?v=ll24VmiYYSY"]SDC12532.AVI - YouTube[/ame]
Last edited: