Need help with servo

[Rmdavila]

I owned a tmaxx trx2.5 everything is stock and brand new. I just finished installing some new 3.8 proline trencher tires and I need u all help on which servo would be best of using with those big tires.

 

[bobaloohoo]

http://www.savoxusa.com/Savox_SB2251SG_6_0V_Brushless_Digital_Servo_p/savsb2251sg.htm

I run this in my MT and i can step on the truck with my 40 series mashers and the tires still turn super fast. its a beautiful and tough servo

 

[mrbones]

http://www.hobbypartz.com/60gexidise.html

Digital coreless 180 oz of torque, metal gears. $15.00.

 

[bobaloohoo]

now bones, I'm not trying to kick your option in the buttocks.. i promise! but one thing you should look at before buying an "off" brand servo is feedback from customers and how long they last, it will vary from customer to customer, but weigh your options/ ALL servos have good and bad input

 

[mrbones]

now bones, I'm not trying to kick your option in the buttocks.. i promise! but one thing you should look at before buying an "off" brand servo is feedback from customers and how long they last, it will vary from customer to customer, but weigh your options/ ALL servos have good and bad input

I don't see negative reviews and I've been using them for several years and I've never had a problem with any of them. A buddy of mine also has probably bought and used 40 of them and never had a problem. He used to buy expensive servos and now he uses these. So for my own use (and his), they serve the same purpose as the expensive ones do for about $80 bucks a crack less.

 

[Nitro4910]

Here's what I'm using in both my truck's, Power HD 1501 MG
http://www.ebay.com/itm/Power-HD-15...Control_Parts_Accessories&hash=item4866ade982
Torque: 236.1 oz/in @(6.0V)
Speed: 0.14 sec @(6.0V)
We've beat on them pretty hard & have had no issues so far, and it flat whips the MT size tires around rather well.

If you still have the on servo servo saver your gonna need to replace it with a better one.
The ones below all fit the servo above, which has a 25th Futaba spline.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXS361&P=SM
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXFNE8&P=7
http://www.amain.com/product_info.p...d/35543/n/Racers-Edge-Servo-Saver-Futaba-Blue

 

[Rolex]

ALL servos have good and bad input

What's even more important is the output.

 

[bobaloohoo]

What's even more important is the output.

well, dont get too crazy now. we all know we drive straight onto the shelves of our walls and park!

 

[Rolex]

You know, it takes a LOT of torque to turn big tires on a glass shelf.

 

[Rmdavila]

So which one should I use analog or digital servo and what's the difference

 

[Alexander_0_1]

https://www.rcnitrotalk.com/forum/showthread.php?t=106471

Post 4 answers your question.

 

[SMaxxin]

If you're on a budget

http://www.savoxusa.com/Savox_SW0231MG_STD_Waterproof_Digital_Servo_p/savsw0231mg.htm

or

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXUZ80&P=SM


Either one will be an improvement over stock. There are better options, how much are you willing to spend?